APRS Packet Errors for 9W2DSL-10 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
202602081534039W2DSL-10>APLRG1,TCPIP*,qAC,T2CHILE:!LMcP$ha6Ka GTaman Kemas LoRa 433.400MHz iGate/Digipeater Batt=3.80V Ext=0.58V
202602081634039W2DSL-10>APLRG1,TCPIP*,qAC,T2CHILE:!LMcP$ha6Ka GTaman Kemas LoRa 433.400MHz iGate/Digipeater Batt=3.84V Ext=0.58V
202602081734039W2DSL-10>APLRG1,TCPIP*,qAC,T2CHILE:!LMcP$ha6Ka GTaman Kemas LoRa 433.400MHz iGate/Digipeater Batt=3.80V Ext=0.58V
202602081834049W2DSL-10>APLRG1,TCPIP*,qAC,T2CHILE:!LMcP$ha6Ka GTaman Kemas LoRa 433.400MHz iGate/Digipeater Batt=3.82V Ext=0.58V
202602081934049W2DSL-10>APLRG1,TCPIP*,qAC,T2CHILE:!LMcP$ha6Ka GTaman Kemas LoRa 433.400MHz iGate/Digipeater Batt=3.83V Ext=0.58V
202602082034049W2DSL-10>APLRG1,TCPIP*,qAC,T2CHILE:!LMcP$ha6Ka GTaman Kemas LoRa 433.400MHz iGate/Digipeater Batt=3.80V Ext=0.58V