APRS Packet Errors for BI6JAA-7 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20260208152143BI6JAA-7>APAT81,BH6IDD-1,WIDE1*,WIDE2-1,qAO,BI6MJQ-10:!3447.88N/11339.53E[358/000/A=000308BI6JAA 438.500mhz NEXTORCH
20260208154117BI6JAA-7>APAT81,BH6IDD-1,WIDE1*,WIDE2-1,qAS,BG6KYT-10:!3447.89N/11339.53E[358/000/A=000305BI6JAA 438.500mhz NEXTORCH
20260208160050BI6JAA-7>APAT81,BH6IDD-1,WIDE1*,WIDE2-1,qAS,BG6KYT-10:!3447.89N/11339.55E[358/000/A=000308BI6JAA 438.500mhz NEXTORCH
20260208164444BI6JAA-7>APAT81,BH6IDD-1,WIDE1*,WIDE2-1,qAS,BG6KYT-10:!3447.88N/11339.53E[007/000/A=000269BI6JAA 438.500mhz NEXTORCH
20260208181348BI6JAA-7>APAT81,BH6IDD-1,WIDE1*,WIDE2-1,qAS,BG6KYT-10:!3447.87N/11339.53E[006/000/A=000295BI6JAA 438.500mhz NEXTORCH
20260208190836BI6JAA-7>APAT81,BH6IDD-1,WIDE1*,WIDE2-1,qAS,BG6KYT-10:!3447.88N/11339.53E[017/000/A=000288BI6JAA 438.500mhz NEXTORCH
20260208201511BI6JAA-7>APAT81,BH6IDD-1,WIDE1*,WIDE2-1,qAS,BG6KYT-10:!3447.88N/11339.53E[190/000/A=000278BI6JAA 438.500mhz NEXTORCH
20260208203444BI6JAA-7>APAT81,BH6IDD-1,WIDE1*,WIDE2-1,qAO,BI6OFS-10:!3447.92N/11339.52E[142/000/A=000298BI6JAA 438.500mhz NEXTORCH