APRS Packet Errors for EA1MZ-10 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20260208150758EA1MZ-10>APLOX1-1,qAR,EA1L-10:!L8QDM1Wq& XLora iGate P=4.21V
20260208151000EA1MZ-10>APLOX1-1,TCPIP*,qAC,T2BC:!L8QDM1Wq& XLora iGate P=4.21V
20260208153643EA1MZ-10>APLOX1-1,qAO,EA1GCN-10:!L8QDM1Wq& XLora iGate P=4.31V
20260208160649EA1MZ-10>APLOX1-1,qAR,EA1L-5:!L8QDM1Wq& XLora iGate P=4.24V
20260208163654EA1MZ-10>APLOX1-1,qAO,EA1GCN-10:!L8QDM1Wq& XLora iGate P=4.27V
20260208170658EA1MZ-10>APLOX1-1,qAO,EA1GCN-10:!L8QDM1Wq& XLora iGate P=4.26V
20260208170900EA1MZ-10>APLOX1-1,TCPIP*,qAC,T2PERTH:!L8QDM1Wq& XLora iGate P=4.26V
20260208173701EA1MZ-10>APLOX1-1,qAO,EA1GCN-10:!L8QDM1Wq& XLora iGate P=4.36V
20260208180709EA1MZ-10>APLOX1-1,qAO,EA1GCN-10:!L8QDM1Wq& XLora iGate P=4.38V
20260208183720EA1MZ-10>APLOX1-1,qAO,EA1GCN-10:!L8QDM1Wq& XLora iGate P=4.23V
20260208190723EA1MZ-10>APLOX1-1,qAO,EA1GCN-10:!L8QDM1Wq& XLora iGate P=4.26V
20260208190925EA1MZ-10>APLOX1-1,TCPIP*,qAC,T2PERTH:!L8QDM1Wq& XLora iGate P=4.26V
20260208193728EA1MZ-10>APLOX1-1,qAO,EA1GCN-10:!L8QDM1Wq& XLora iGate P=4.38V
20260208200732EA1MZ-10>APLOX1-1,qAR,EA1L-10:!L8QDM1Wq& XLora iGate P=4.28V
20260208203741EA1MZ-10>APLOX1-1,qAO,EA1GCN-10:!L8QDM1Wq& XLora iGate P=4.32V