APRS Packet Errors for EC1AME-10 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20260208151519EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208154519EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208161520EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208164520EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208171520EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208174520EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208181520EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208184520EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208191520EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208194520EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208201521EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate
20260208204521EC1AME-10>APLRG1,TCPIP*,qAC,T2CHILE:!L9&3RLN:[a GLoRa APRS_RX iGate