APRS Packet Errors for IW0GLZ-2 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20260208131834IW0GLZ-2>APMI03,WIDE2-2,qAO,IZ0ORT-2:@081316z4205.50N/01220.73E# A.P.R.S. Digipeater 432.500MHz Cesano
20260208140837IW0GLZ-2>APMI03,WIDE2-2,qAR,I0YYA-10:@081406z4205.50N/01220.73E# A.P.R.S. Digipeater 432.500MHz Cesano
20260208140918IW0GLZ-2>APMI03,I0YYA-10*,WIDE2-1,qAO,IZ0ORT-2:@081406z4205.50N/01220.73E# A.P.R.S. Digipeater 432.500MHz Cesano
20260208145840IW0GLZ-2>APMI03,WIDE2-2,qAO,IZ0ORT-2:@081456z4205.50N/01220.73E# A.P.R.S. Digipeater 432.500MHz Cesano
20260208154842IW0GLZ-2>APMI03,WIDE2-2,qAO,IZ0ORT-2:@081546z4205.50N/01220.73E# A.P.R.S. Digipeater 432.500MHz Cesano
20260208163846IW0GLZ-2>APMI03,WIDE2-2,qAO,IZ0ORT-2:@081636z4205.50N/01220.73E# A.P.R.S. Digipeater 432.500MHz Cesano
20260208172848IW0GLZ-2>APMI03,WIDE2-2,qAO,IZ0ORT-2:@081726z4205.50N/01220.73E# A.P.R.S. Digipeater 432.500MHz Cesano
20260208181851IW0GLZ-2>APMI03,WIDE2-2,qAR,IU0JIW-2:@081817z4205.50N/01220.73E# A.P.R.S. Digipeater 432.500MHz Cesano