APRS Packet Errors for MW0LPU-15 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)	Packet
20260208152042	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.83V
20260208155042	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.82V
20260208162043	MW0LPU-15>APLRG1,WIDE1-1,qAR,G7RHF-10:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.82V
20260208165043	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.82V
20260208172043	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.82V
20260208175043	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.81V
20260208182045	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.81V
20260208185044	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.81V
20260208192045	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.81V
20260208195045	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.81V
20260208202045	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.81V
20260208205046	MW0LPU-15>APLRG1,WIDE1-1,qAO,MW0LPU-12:!L46HoMgj# GBrecon LoRa Solar Digi Batt=3.81V