APRS Packet Errors for OE9PCI-10 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)	Packet
20260208134135	OE9PCI-10>APLRG1,TCPIP*,qAC,T2UK:!L6Lq`Pwj-a GLoRa APRS iGate Bregenz RX 433.775MHz TX 433.900MHz https://github.com/richonguzman Batt=4.15V
20260208142635	OE9PCI-10>APLRG1,TCPIP*,qAC,T2UK:!L6Lq`Pwj-a GLoRa APRS iGate Bregenz RX 433.775MHz TX 433.900MHz https://github.com/richonguzman Batt=4.15V
20260208151135	OE9PCI-10>APLRG1,TCPIP*,qAC,T2UK:!L6Lq`Pwj-a GLoRa APRS iGate Bregenz RX 433.775MHz TX 433.900MHz https://github.com/richonguzman Batt=4.15V
20260208155636	OE9PCI-10>APLRG1,TCPIP*,qAC,T2UK:!L6Lq`Pwj-a GLoRa APRS iGate Bregenz RX 433.775MHz TX 433.900MHz https://github.com/richonguzman Batt=4.15V
20260208164136	OE9PCI-10>APLRG1,TCPIP*,qAC,T2UK:!L6Lq`Pwj-a GLoRa APRS iGate Bregenz RX 433.775MHz TX 433.900MHz https://github.com/richonguzman Batt=4.15V
20260208172636	OE9PCI-10>APLRG1,TCPIP*,qAC,T2UK:!L6Lq`Pwj-a GLoRa APRS iGate Bregenz RX 433.775MHz TX 433.900MHz https://github.com/richonguzman Batt=4.15V
20260208181137	OE9PCI-10>APLRG1,TCPIP*,qAC,T2UK:!L6Lq`Pwj-a GLoRa APRS iGate Bregenz RX 433.775MHz TX 433.900MHz https://github.com/richonguzman Batt=4.15V
20260208185637	OE9PCI-10>APLRG1,TCPIP*,qAC,T2UK:!L6Lq`Pwj-a GLoRa APRS iGate Bregenz RX 433.775MHz TX 433.900MHz https://github.com/richonguzman Batt=4.15V