APRS Packet Errors for PA3GEO-10 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)	Packet
20260208131204	PA3GEO-10>APLG01,TCPIP*,qAC,T2CSNGRAD:=5124.96NL00411.07E&PA3GEO LoRa APRS iGate - 433.775 MHz RX-only
20260208132704	PA3GEO-10>APLG01,TCPIP*,qAC,T2SPAIN:=5124.96NL00411.07E&PA3GEO LoRa APRS iGate - 433.775 MHz RX-only
20260208134204	PA3GEO-10>APLG01,TCPIP*,qAC,T2SPAIN:=5124.96NL00411.07E&PA3GEO LoRa APRS iGate - 433.775 MHz RX-only
20260208135704	PA3GEO-10>APLG01,TCPIP*,qAC,T2CSNGRAD:=5124.96NL00411.07E&PA3GEO LoRa APRS iGate - 433.775 MHz RX-only
20260208141204	PA3GEO-10>APLG01,TCPIP*,qAC,T2CSNGRAD:=5124.96NL00411.07E&PA3GEO LoRa APRS iGate - 433.775 MHz RX-only
20260208142704	PA3GEO-10>APLG01,TCPIP*,qAC,T2CSNGRAD:=5124.96NL00411.07E&PA3GEO LoRa APRS iGate - 433.775 MHz RX-only
20260208144204	PA3GEO-10>APLG01,TCPIP*,qAC,T2CSNGRAD:=5124.96NL00411.07E&PA3GEO LoRa APRS iGate - 433.775 MHz RX-only
20260208145704	PA3GEO-10>APLG01,TCPIP*,qAC,T2CSNGRAD:=5124.96NL00411.07E&PA3GEO LoRa APRS iGate - 433.775 MHz RX-only
20260208151204	PA3GEO-10>APLG01,TCPIP*,qAC,T2CSNGRAD:=5124.96NL00411.07E&PA3GEO LoRa APRS iGate - 433.775 MHz RX-only