APRS Packet Errors for SN7I-2 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)	Packet
20260208180852	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.73V
20260208183853	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.73V
20260208190853	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.73V
20260208193851	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.73V
20260208200852	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.73V
20260208203852	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.73V
20260208210852	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.73V
20260208213852	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.72V
20260208223852	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.72V
20260208230853	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.72V
20260208233853	SN7I-2>APLRG1,WIDE1-1,qAR,SN7I-1:!L4ja*S[QP# GLoRa APRS Batt=3.72V