APRS Packet Errors for SR2INO (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20260208162123SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208165057SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208171453SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208171528SR2INO>APRX29,SR3NWY,WIDE1*,qAR,SR3KFM:!5247.60NI01814.98E#Digi & Igate 2m
20260208173928SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208180348SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208183253SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208190142SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208193114SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208195537SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208202149SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208204958SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208211503SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208214358SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m
20260208221008SR2INO>APRX29,TCPIP*,qAC,T2PERTH:!5247.60NI01814.98E#Digi & Igate 2m