APRS Packet Errors for TA1RX-2 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)	Packet
20260208133316	TA1RX-2>APRS,TCPIP*,qAC,T2ITALY:!4106.08N/02901.89E;Portable Station; LoRaAPRS-IGate on 433mhz, Meshtastic node on 868mhz
20260208141358	TA1RX-2>APRS,TCPIP*,qAC,T2TURKIYE:!4106.08N/02901.89E;Portable Station; LoRaAPRS-IGate on 433mhz, Meshtastic node on 868mhz
20260208150033	TA1RX-2>APRS,TCPIP*,qAC,T2CZECH:!4106.08N/02901.89E;Portable Station; LoRaAPRS-IGate on 433mhz, Meshtastic node on 868mhz
20260208155906	TA1RX-2>APRS,TCPIP*,qAC,T2UKRAINE:!4106.08N/02901.89E;Portable Station; LoRaAPRS-IGate on 433mhz, Meshtastic node on 868mhz
20260208163328	TA1RX-2>APRS,TCPIP*,qAC,T2POLC:!4106.08N/02901.89E;Portable Station; LoRaAPRS-IGate on 433mhz, Meshtastic node on 868mhz
20260208170307	TA1RX-2>APRS,TCPIP*,qAC,T2SPAIN:!4106.08N/02901.89E;Portable Station; LoRaAPRS-IGate on 433mhz, Meshtastic node on 868mhz
20260208175905	TA1RX-2>APRS,TCPIP*,qAC,T2UKRAINE:!4106.08N/02901.89E;Portable Station; LoRaAPRS-IGate on 433mhz, Meshtastic node on 868mhz
20260208183822	TA1RX-2>APRS,TCPIP*,qAC,T2SPAIN:!4106.08N/02901.89E;Portable Station; LoRaAPRS-IGate on 433mhz, Meshtastic node on 868mhz