APRS Packet Errors for VA7SAT-10 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20260208145915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208152915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208155915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208162915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208165915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208172915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208175915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208182915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208185915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208192915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208195915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR
20260208202915VA7SAT-10>APDW18,qAS,VA7SAT:!5033.33NR11943.48W&144.390MHz RX ONLY IGate | RPi | RTL-SDR