APRS Packet Errors for ZS1L-2 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)	Packet
20260208163342	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi
20260208165342	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi
20260208171342	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi
20260208173342	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi
20260208175342	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi
20260208181343	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi
20260208183343	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi
20260208185342	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi
20260208191342	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi
20260208193342	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi
20260208195343	ZS1L-2>APDW16,TCPIP*,qAC,T2ALBERTA:!b_eJ.S9[V# ! ZS1L DigiPi